Axxess-interface ABTI-GM1 Manuel d'utilisateur

ABTI-GM1ABTI-GM11-800-221-0932 © COPYRIGHT 2007-2008 METRA ELECTRONICS CORPORATIONwww.axxessonline.comGM CLASS II INTERFACE FOR HANDSFREEBLUETO

ABTI-GM11* READ IMPORTANT WARNING BEFORE ATTEMPTING ANY INSTALLATION* IMPORTANT WARNINGTHIS PRODUCT INCLUDES INSTRUCTIONS FOR INSTALLATION WHICH MUST

ABTI-GM12INSTALLING THE ABTI-GM1 WITH THE MOTOROLA IHF1000Note: 8-Way to 8-Way connector harness is used in this application.NOTE: The ISO to 8 way co

ABTI-GM133) Insert the 24 pin plug on the Class 2 cable into the rear of the radio.4) Insert the 12 pin plug on the Class 2 cable into the rear of the

ABTI-GM145) Connect the 24 pin cap on the Class 2 cable to the 24 pin plug connected to the vehicle (theconnector that was removed from the back of th

ABTI-GM158) Connect the white 8-pin plug on the IHF-1000 cable to the power cable, and connect theother end of the power cable to the ABTI-GM1 module.

6ABTI-GM19) Plug the ISO side of the ISO to 8 way harness into the mating Parrot connectors.10) Take the Mute wire of the Parrot kit and plug it into

ABTI-GM1 INSTRUCTIONS1-800-221-0932 REV. 09/02/08 © COPYRIGHT 2007-2008 METRA ELECTRONICS CORPORATION INSTABTI-GM1 www.axxessonline.com